Transcription

GAS/LIQUID COALESCERSPEACH Saturated Depth Coalescing cartridges provide a gradient 3-D depth matrix structurewhich allows liquids to saturate the media depth and grow to their fullest potential then drainwith gravity when the droplet is ready. These liquid droplets often take with them solidcontaminant particles, as well, causing a “self-cleaning” effect within the media matrix.Grade: 0.3Performance Levels:PL-01 99.5% liquids and 99.9% solids, normal to heavy contaminant loading conditionsPL-20 99.99 liquids and solids, polishing, protection of critical equipment such as gas turbinesPL-23 99.99% liquids & solids, ultra-high effluent applications, light foam applicationsPEACH GeminiModel PGCFor use in PECOFacet housing PEACH Gemini PuraSep , Model PGCPH.Standard sizes 373, 382, 394PEACH DynaCeptor Models NGGC PL-01, PL-20, PL-23Model PZC for housings with Z-Bar risersFor use in PECOFacet housing Model 77V and 89 as well as other reverse flow coalescinghousings made by Pall, Porous Media and others.Standard sizes 312, 324, 336, 540Competitor retrofit sizes also available:PEACH DynaCeptor 36PEACH DynaCeptor 330PEACH DynaCeptor 640PEACH DynaCeptor 36PEACH DynaCeptor 640(Retrofit Design)(Retrofit Design)p-Ceptor j-Ceptor FibrCeptor FFModel CIO, NGGC PL-51Models PMGRF, MGRFModel FFA robust pleated style coalescer providingexcellent performance drainage. Made using100% fluorocarbon coated pleated microglassmedia.Standard size 336Competitor retrofit sizes also available:p-Ceptor 36p-Ceptor 330p-Ceptor 640Grade: 0.3Performance Level:PL-51 99.97% liquids and solids, recommendedfor light continuous oil or condensate removalp-Ceptor 36(retrofit design)Economical pleated style coalescer. It utilizes asynthetic /cellulose media.Excellent replacement to Jonell JMG-R andJPMG-R reverse flow coalescers.Standard sizes 12, 36, 312, 312, 324, 336Competitor retrofit sizes also available:j-Ceptor 36j-Ceptor 330j-Ceptor 640Depth style coalescer with an optional integralpleated pre-filter. Unique silicone molded end capsfor excellent compatibility and to eliminate theneed for metal end caps and elastomer gaskets.Depth tube is made from molded microglassmedia.Standard sizes 12, 24, 36, 312, 324, 336, 540Grades: 0.1 and 0.3Grade: 0.3j-Ceptor 36j-Ceptor 330FibrCeptor FFP(retrofit design)(retrofit design)Model FFPIncludes InternalPleat Packp-Ceptor 330(retrofit design)j-Ceptor 640(retrofit design)p-Ceptor 640j-Ceptor MGFibrCeptor HTOModel FF-HTOHigh TemperatureOperation(retrofit design)Aftermarket --- Quick Reference GuideR1

FILTER-SEPARATOR CARTRIDGESPEACH DynaSep This PEACH technology cartridge is a great choice forremoving deformable and shear sensitive contaminantstypically found in natural gas applications. The rigidstructure maintains an open porosity and permeability,while the tortuous, helical flow path increases theprobability for contaminants to impact filter fibers.Model PCHGFor use in PECOFacet housing Model 75 and 85 as well asother filter-sep housings made by Peerless, King Tool, andsub-fabricators.Standard sizes 12, 24, 36, 72, 312, 324, 336, 372, 536, 572Competitor retrofit sizes also available:PEACH DynaSep KPEACH DynaSep PGrades: 0.3 (iron sulfides), 0.5, 1, 5, 10PEACH DynaSep KPEACH DynaSep PModel KPCHG(Retrofit Design)Model PPCHG(Retrofit Design)Model EZ-PCHGThe Original fiberglass filterseparator cartridge made from moldedfiberglass.FibrSep Model FGFor use in vertical and horizontal filterseparator housings made byPECOFacet, King Tool, Peerless andothers.New cartridge design to fit the TITAN PuraSep tool-less filter-sep.The cartridge includes patent pending EZ-Align technology whichprovides a locating key in the top cap and chevron gasket seal. Thisensures the cartridge is aligned and held in place, prevents saggingduring installation and operation, provides absolute sealing so gasdoes not bypass and allows for easy cartridge installation andremoval with no tools required.FibrSep HTOModel FGGFHigh TemperatureOperationFibrSep GX Scheduled MaintenanceModel FGXIt’s the perfect choice forcustomers with ScheduledMaintenance at the Right Price.Try it today!Standard sizes 12, 24, 36, 312, 324,336, 372, 536, 572Competitor retrofit sizes also available:FibrSep KFibrSep PA synthetic alternative to fiberglass filter separatorcartridges.Grades: 0.3 (iron sulfides), 0.5, 1, 5, 10, 25, 50FibrSep KPriced lower and performs better than its fiberglasscounterpart.FibrSep PModel KFG(Retrofit Design)Model PPFG(Retrofit Design)Environmentally friendly product available with integralsynthetic end caps to eliminate need for metal end capsand elastomer gaskets.Available in sizes 312, 324, 336, 372, 536, 572 and otherretrofit sizes.Grade: 1DRY GAS CARTRIDGESTruGard PleatGard GritGard Model PSFGModel PSModel PEPP/PEPSIdeal for dry natural gas and air applicationswith a high contaminant volume present.Made from polyester, polypropylene, glass ornylon pleated media with absolute efficiency.For use in PECOFacet housing Model 70 and90 as well as other housings made by Peerless,King Tool, and sub-fabricatorsStandard sizes 324, 336, 372, 536, 636Also available in EZ-Align technology designto fit inside Titan PuraSep dry gas housings.Grades: 0.5, 1, 5, 10, 20, 50Durable and easy to install,these basket style cartridgesoffer high contaminant loadingcapacity for small volume drynatural gas and airapplications.These gas cartridges remove particulate from smallvolume gas streams with outstanding efficiency,durability and service life.Made from polyester or cellulose media.Made from polyester mediawith absolute efficiency.For use in PECOFacet Model30F inline gas filter housings.Standard sizes 519, 5519, 819For use in PECOFacet Model 30, cast steel, inlinegas filter housings.Also availble:PEACH DynaGard Standard sizes 6 x 3.12 and 6 x 7.81Grades: 2, 5, 10, 20Also availble:PEACH DynaGard Grades: 2, 5, 10, 20Aftermarket --- Quick Reference GuideR1

SMALL DIAMETER, DEPTH STYLE CARTRIDGES FOR PARTICULATE REMOVAL FROM LIQUIDSPEACH technology depth cartridges made from polyester or polypropylene PECOFacetEngineered Media (PEM) that provide a unique, 3-D matrix thermally bonded to create ahelical flow path. Great for removing deformable type contaminants typically seen inliquid processes such as amine and glycol.PEACH-Pure Models PPL & P90Now offered in Hot PEACH technology using PPS media for higher temperature andbroader chemical compatibility applications up to 400 F / 204 C, including caustics,quench water, red and green oils, aromatics, etc.Also available in:For use in PECOFacet housing Model 55 or similar competitor housings.Standard sizes 210, 219, 220, 229, 230, 240 with DOE, 222/closed, 222/fin, 226/closed,226/fin, spring and other most common end fittings. End caps are thermally bonded.Model PPL --- Grades: 5, 10, 15, 20, 40 @ 99.9% efficiencyModel P90 --- Grades: 1, 5, 10, 25, 40, 60, 100, 125, 150 @ 90% efficiencyPolypropylene meltblown cartridges thatprovide an economical price with consistentquality and performance.Melt-Pure Model MPFor use in PECOFacet housing Model 55 orsimilar competitor housings.Res-Pure Model PRBStandard sizes 209, 210, 219, 229, 230, 240,250, 260 in a DOE end configuration.Grades: 1, 3, 5, 10, 20, 50, 75Grades: 2, 5, 10, 25, 50, 75, 100, 125, 150The traditional liquid sock filter. These rolled depthcartridges provide filtration through multiple layers ofcontrolled density filter media formed into a mat androlled onto a core.Models FT, FTS, FMP,GF, WC, PCLMade from acrylic/polyester fibers bondedwith a phenolic resin and spiral grooved forincreased dirt holding capacity,For use in PECOFacet housing Model 55 orsimilar competitor housings.Standard sizes 210, 219, 220, 229, 230, 240with DOE, 222/closed, 222/fin, 226/closed,226/fin, spring and other most common endfittings. End caps are thermally bonded.Tex-Pure Resin bonded style cartridges particularlygood for use in high viscosity fluidapplications.Wound-Pure Model PFIStringwound cartridges made using aprecise continuous winding process.Made from a wide variety of fibers including FilterTex, cotton, polypropylene and fiberglass.Made from a wide variety of high qualityyarn including cotton, rayon, fiberglass,polypropylene, polyester, nylon and ryton.For use in PECOFacet housing Model 55 or similarcompetitor housings.For use in PECOFacet housing Model 55 orsimilar competitor housings.Standard sizes 318, 330, 336, 436Retrofit sizes available.Available in a wide range of sizes andgrades.Grades: wide range available from 2 to 100SMALL DIAMETER, PLEATED STYLE CARTRIDGES FOR PARTICULATE REMOVAL FROM LIQUIDSCelluPleat Pleated cellulose cartridges that provide efficient andeconomical filtration of fluids in a wide range ofapplications.Model FIMade using pleated resin impregnated cellulose orcellulose/glass blends and providing a large surfacearea for maximum dirt holding, high flow rates andlow initial pressure drops.Tru-Cell Model CPStandard sizes 209, 210, 219, 220, 229,230, 240, 336 and other retrofit sizes witha variety of end configurations and steelhardware option.For use in PECOFacet housing Model 55 or similarcompetitor housings.Standard sizes 209, 229, 230, 318, 336, 412, 424, 456 and other retrofit sizeswith DOE or spring end configurations.CelluPleat EModel CFGrades: 3, 5, 10, 20, 40, 70, 100Tru-Pleat Pleated cellulose cartridges that provide efficient andeconomical filtration of fluids in a wide range ofapplications.Made using pleated resin impregnated cellulose withsynthetic hardware and thermally bonded end caps.For use in PECOFacet housing Model 55 or similarcompetitor housings.Made using a blend of synthetic andcellulose fibers to provide added strengthand durability.For use in PECOFacet housing Model 55 orsimilar competitor housings.Optional outer metal cover provides pleat protection.Glass/Cellulose Grades: 0.5, 1, 3Cellulose Grades: 1, 3, 5, 10, 15, 20, 30, 40, 50, 75, 100Pleated composite cartridges provide astep up from traditional pleated cellulosecartridges.Model PSTru-Pleat GModel PS (glass)All synthetic pleated cartridges thatprovide durability and absoluteefficiency. The thermal bonded endcaps provide the ultimatecompatibility with process fluids.Made using pleated polyester,polypropylene or glass medias.For use in PECOFacet housing Model55 or similar competitor housings.Standard sizes 209, 210, 219, 220, 229, 230, 240, 336 and other retrofit sizeswith a variety of end configurations and steel hardware option.Standard sizes 209, 210, 219, 220,229, 230, 240, 336 and other retrofitsizes with a variety of endconfigurations and steel hardwareoption.Grades: 2, 5, 10, 25, 50Grades: 0.5, 2, 5, 10, 15, 20, 40, 70Aftermarket --- Quick Reference GuideR1

LARGE DIAMETER CARTRIDGES FOR PARTICULATE REMOVAL FROM LIQUIDSXtreamPure Large diameter high flow capacity cartridges that flow in-to-out, keeping contaminanttrapped within the cartridge. Excellent for use in applications above 200 gpm.Models XP & XPHPLarge media selection and come in both pleated and PEACH depth options.For use in PECOFacet housing Model 55X or similar competitor housings such as the Pall highflow housing.Standard sizes 620, 640, 660, 680Grades: wide range available from 0.5 to 100 depending on media selection instandard design and high performance designLarge diameter PEACH cartridge that utilizesPEACH GOLD (Gradient Optimized Liquid Depth)technology to provide double the depth structure.The cartridge is very well suited for removingdeformable and shear sensitive contaminants likethose seen in liquids such as amine and glycol.The large diameter footprint, compared totraditional 2.5” and 3” OD cartridges, results infewer cartridges to install and remove and lessdown time.GOLDXtream Model PHDLarge diameter pleated cartridge thatprovides extremely high solids loadingcapacity and also reduces the number ofcartridges required in a given housingfootprint compared to traditional 2.5” and 3”OD cartridges. This results in fewercartridges to install and remove and lessdown time.PleatXtream Model OPHDW-Pleat, SyntheticFor use in PECOFacet housing Model 55HDor similar competitor housings. Excellentreplacement to 3M 740 style.For use in PECOFacet housing Model 55HD orsimilar competitor housings. Excellentreplacement to 3M 740 style.OPHD model utilizes a w-pleat. Two othereconomical traditional pleat versions also areavailable.Standard size 639 (chevron/o-ring seal)Also available in 636, 644 size with DOE end capsand flat gaskets seals (Model P600D)Standard size 639Grades: wide range available from 2 to 70Grades: wide range available from 2 to 70GOLDXtream 600DPleatXtream SPleatXtream EModel P600DModel HDStandard Pleat, SyntheticModel HDStandard Pleat, CelluloseAlso available in:Tru-Pleat XLModel PSChemelean Model CMLarge diameter cartridges with good versitility to adapt to awide variety of process liquid applications up to 200 gpm.Synthetic pleated cartridges that providedurability and absolute efficiency. The pleatsare protected by a metal outer cover.Made using pleated polyester or polypropylenemedias.Large media selection and come in both pleated andPEACH depth options.For use in PECOFacet housing Model 55 orsimilar competitor housings.For use in PECOFacet housing Model 55C or similarcompetitor housings.Standard sizes 630, 636, 644, 736 and otherretrofit sizes with a DOE end configuration.Standard size 620, 640Grades: 0.5, 2, 5, 10, 15, 20, 40, 70Grades: wide range available from 0.5 to 100 depending onmedia selection.CelluPleat XLTuff-Pleat Model FISAn advanced pleated synthetic cartridge that offershigh performance and excellent compatibilitycompared to conventional cellulose cartridges.Model FIPleated cellulose cartridges that provide efficientand economical filtration of fluids in a wide range ofapplications.Made using pleated resin impregnated cellulose orcellulose/glass blends and providing a large surfacearea for maximum dirt holding, high flow rates andlow initial pressure drops.Made using pleated polyester or polyester/glassblend and supported with epoxy coated wire toensure pleat stability.Optional outer metal cover provides pleatprotection.For use in PECOFacet housing Model 55 or similarcompetitor housings.For use in PECOFacet housing Model 55 or similarcompetitor housings.Standard sizes 209, 511, 518, 618, 636, 718, 736and other retrofit sizes with DOE end configuration.Polyester/Glass Grades: 0.5, 1, 3, 5Polyester Grades: 10, 15, 20, 30, 40, 50, 75, 100Standard sizes 509, 511, 518, 607, 608, 614, 618, 629, 630, 636, 644, 656, 718,729, 730, 736 and other retrofit sizes with a DOE end configuration.Glass/Cellulose Grades: 0.5, 1, 3Cellulose Grades: 1, 3, 5, 10, 15, 20, 30, 40, 50, 75, 100Aftermarket --- Quick Reference GuideR1

BAGS & BAG REPLACEMENT CARTRIDGES FOR PARTICULATE REMOVAL FROM LIQUIDSA wide variety of felt and mesh filter bags areavailable designed to fit most bag housings onthe market.DynaClear FFelt BagsModels A, PE, PO,WPE, WPOOr as an option try our pleated bag replacementcartridges which provide increased surface areaand improved efficiency. Designed to replacemost #2 size bags.DynaClear BRModel BRWide range of materials and grades available.These cartridges combine the filtration area of apleated filter with the convienence of a standardbag filter configuration. They install directly intoyour bag housing with no special adapters ormodifications.Sizes to fit #1 and #2 size bag housings witheither flat or rounded end baskets.DynaClear MVariety of materials and grades available.Mesh BagsModels NM, NMO,PEM, PMOMETAL CARTRIDGES FOR PARTICULATE REMOVALPoromet Model PP, PM, PFCleanable stainless steel filter cartridges for hightemperature and high corrosion processingapplications.MM-Screen Model MMMade from 316L stainless steel in both cylindricaland pleated configurations.Cleanable stainless steel filter cartridges used toremove solids from liquids, compressed air andgas.These are assembled by wrapping layers ofstainless steel mesh cloth around a perforatedsupport shell.Standard sizes 210, 220, 230, 240 with NPT,222/closed, 226/closed or DOE end fittings.For use in PECOFacet Model M housings orothers that accept 6”OD x 3.5”ID DOE stylecartridges in lengths up to 44”.Wide range of grades available from 10 to 150.Grades: 5, 10, 25, 40, 75, 150, 200, 250, 400, 750ACTIVATED CARBON ADSORBERSXtreamSorb Model XSThe best of both worlds! PEACH outerlayer removes particulate and absorbssome hydrocarbons. The carbon blockbeneath the PEACH layer adsorbshydrocarbons and other impuritiesfrom liquid streams such as amine andglycol. The activated carbon in blockform reduces carbon finesdownstream.The cartridge footprint is smaller then atraditional granular carbon canistermaking it lighter weight and easier tohandle.For use in PECOFacet carbon housingModel 14. Also available on a skidwhich contains (2) Xtreamsorb housings and (1) Chemelean pre-filterhousing.Standard sizes 520, 540, 544CarboMax CANISTERSCanister style activated carbon product thatadsorb hydrocarbons and other impuritiesfrom liquid streams such as amine andglycol.Made from high quality virgin activatedcarbon.For use in PECOFacet carbon housingModel 10 or similar competitor housings.Standard sizes 618, 619, 636, 719, 720, 722,1120, 1122, 1130, 1136 and other retrofitsizes.Sizes available to retrofit existingcarbon housings using granularcanisters.Bulk activated carbon product that adsorb hydrocarbon and other impurities from liquid streamssuch as amine and glycol.CarboMax BULKMade from high quality virgin activated carbon.For use in PECOFacet carbon housing Model 10FB or similar competitor housings.Standard sizes 4x12 and 8x30Non-activated support carbon also available.Aftermarket --- Quick Reference GuideR1

LIQUID/LIQUID COALESCERS & SEPARATORSHigh quality coalescer and separator cartridges for phase separation of two immisciblefluids. One of the most common applications is removing emulsified water fromhydrocarbon fluids.InterPhase Coalescers are made from fiberglass media with an option for an integral pleatedcellulose layer for solids loading.Model CDepth, Glass CoalescerSeparators are made from silicone treated pleated paper, synthetic hydrophobic mesh orTeflon coated screen.InterPhase CPFNon API qualified.Model CB, CC, CRDepth, Glass Coalescer withInternal Pleat PackFor use in PECOFacet housing Model 110 or similar competitor housings.Standard sizes 611, 614, 622, 629, 636, 644, 648, 656 and other retrofit sizes in a DOE orscrew base end configuration.Model CPF Internal Pleat Pack Grades: 2, 5, 25InterPhase SPModel SP, Cellulose SeparatorInterPhase SSModel SS, Synthetic SeparatorInterPhase STModel ST, Teflon separatorXtreamPhase 4PModel PLPC, PEACH Saturated Depth CoalescerModel SH, Synthetic SeparatorXtreamPhase 6PModel PLPC , PEACH Saturated Depth CoalescerXtreamPhase 4TModel TLPC, Pleated Timlar CoalescerModel SH, Teflon SeparatorXtreamPhase 6TModel TLPC coalescer, Pleated Timlar CoalescerXtreamPhase cartridges are available in PEACH polymeric media or Timlar media. Both medias reduce disarming sometimes seen when using glass coalescers.Disarming occurs when surfactants shield/coat the coalescing media fibers (traditionally glass) and change the surface energy of the fibers. This prevents theadsorptive attractions needed to efficiently separate the discontinuous phase liquid.Model PLPC utilized PEACH polymeric media and is recommended for water separation from hydrocarbons.Model TLPC utilizes a proprietary, pleated Timlar fluorocarbon media. It is recommended for low interfacial surface tension (IFT) fluids and corrosive separationapplications such as caustic from fuels, amine from hydrocarbons, oil from ammonia, water from hydrogen peroxide, oil from water, hydrocarbons from quenchwater.The coalescer cartridges can be combined with an InterPhase SS or InterPhase ST separator mentioned above.Non API qualified.Model 6P & 6T - stan